- ページ 29

洗濯機 Electrolux EIFLW55HMB - 27" Front-Load WasherのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux EIFLW55HMB - 27" Front-Load Washer 32 ページ。 Iq-touch front-load washer
Electrolux EIFLW55HMB - 27" Front-Load Washer にも：仕様 (2 ページ), 技術データシート (16 ページ), 仕様 (2 ページ), (スペイン語）使用およびケアガイド (36 ページ), (フランス語) 使用および保守ガイド (36 ページ)

ページを印刷する

Service Prevention Checklist

Before calling for service, review this list. It may save both time and expense. The list includes common

occurrences that are not the result of defective workmanship or materials in this washer.

OCCURRENCE

POSSIBLE CAUSE

NOISE

High pitch "jet engine"

A certain amount of motor whine is nor-

noise.

mal during the spin cycle.

Rattling and clanking

Foreign objects such as coins or safety

noise.

pins may be in drum or pump.

Belt buckles and metal fasteners are hit-

ting wash drum.

Thumping sound.

Heavy wash loads may produce a

thumping sound. This is usually normal. If

sound continues, washer is probably out

of balance.

Vibrating noise.

Washer is not resting firmly on floor.

Shipping bolts and foam block have not

been removed during installation.

Wash load unevenly distributed in drum.

OPERATING

Washer does not start.

Electrical power cord may not be plugged

in or connection may be loose.

House fuse blown, circuit breaker

tripped, or a power outage has occurred.

Water supply faucets are not turned on.

Motor is overheated. Washer motor will

stop if it becomes overheated.

Washer door is not completely closed.

Washer won't spin.

Load is too small.

Residue left in drum.

Heavily soiled items.

LCD displays

Washer has been programmed to tempo-

DEMO MODE

rarily perform a repeating demo cycle.

Solutions to Common Problems

SOLUTION

Stop washer and check drum. If noise continues after

washer is restarted, objects may be in pump. Call your

authorized servicer.

To prevent unnecessary noise and damage to drum,

fasten fasteners and turn items inside out.

Stop washer and redistribute wash load.

Move washer so it rests firmly on floor. Adjust leveling

legs. See INSTALLATION INSTRUCTIONS for details.

See INSTALLATION INSTRUCTIONS for removing ship-

ping bolts and foam block.

Stop washer and rearrange wash load.

Make sure plug fits tightly in wall outlet.

Reset circuit breaker or replace fuse. Do not increase

fuse capacity. If problem is a circuit overload, have

it corrected by a qualified electrician. If problem is a

power outage, call local electric company.

Turn on water supply faucets.

It will automatically restart after a cool down period

of up to 30 minutes (if washer has not been manually

turned off).

Close door completely.

Add 1 or 2 similar items to help balance the load.

Wipe drum with a nonabrasive household cleanser, then

rinse. Shake or brush excess dirt and sand from items

before washing

To return to the factory default settings, press and hold

the spin speed and soil buttons at the same for 5 sec.