- ページ 22
洗濯機 Electrolux EN6T4722AFのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Electrolux EN6T4722AF 36 ページ。
ページを印刷する
22
www.electrolux.com
3. If desired, set one or more options by
touching the related buttons. The
related indicators illuminate on the
display and the given information
changes accordingly.
If a selection is not possible
an acoustic signal sounds
and the display shows
11.6 Starting a programme
Touch the Inicio/Pausa
the programme. It is not possible to start
the programme when the indicator of the
button is off and doesn't flash (e.g.
programme dial on a wrong position).
The related indicator stops flashing and
stays on.
The programme starts, the lid is locked.
The display shows the indicator
The drain pump can operate
shortly before the appliance
fills water.
11.7 Starting a programme with
the delay start
1. Touch the Inicio Diferido button
repeatedly until the display shows the
desired delay time. On the display the
indicator shows
2. Touch the Inicio/Pausa
The appliance lid locks and starts the
countdown of the delay start. The display
shows the indicator
When the countdown is completed, the
programme starts automatically.
Cancelling the delay start after
the countdown has started
To cancel the delay start:
1. Touch the Inicio/Pausa
pause the appliance. The related
indicator flashes.
2. Touch the Inicio Diferido button
repeatedly until the display shows
and the indicator
.
button to start
.
button.
.
button to
goes off.
3. Touch the Inicio/Pausa
again to start the programme
immediately.
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Inicio/Pausa
pause the appliance. The related
indicator flashes.
2. Touch the Inicio Diferido button
repeatedly until the display shows the
desired delay time.
3. Touch the Inicio/Pausa
again to start the new countdown.
11.8 The SensiCare System
load detection
.
After touching the Inicio/Pausa
button:
1. The SensiCare System starts
estimating the weight of the load to
calculate the real programme
duration. During this phase the Time
Manager bars
time digits play a simple animation.
2. After about 15-20 minutes the Time
Manager bars disappear and new
cycle duration is displayed.
The appliance automatically adjusts
the programme duration to the load
to achieve perfect washing results in
the minimum possible time.
The SensiCare System is
not available with all
programmes such as :Lana/
Lãs, Aclarado/Enxag.,
Centrif. and programmes
with short cycles.
11.9 Interrupting a programme
and changing the options
When the programme is running, you
can change only some options:
1. Touch the button Inicio/Pausa
The related indicator flashes.
button
button to
button
placed below the
.