- ページ 27

洗濯機 Electrolux EW 1000 IのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux EW 1000 I 28 ページ。 Electrolux instruction manual compact washer ew 1000 i

Recommendations regarding the

construction and fitting of a base

when the installation requires an

integrated appliance to be raised

Where the appliance has been raised by mounting onto

a wooden base provided by the installer. The material

used to construct the base should have a non slip

surface, be water repellent and if possible be one solid

piece.

If it is not possible to use one solid piece, due to the

additional height required, ensure that any additional

strips of timber are glued and screwed to the underside

of the base (see Fig. F).

Drill four fixing holes see Fig. G

Top view

Position the base into the recess with its front edge as

far forward as the adjoining plinth line will allow. The

reason for placing the base in this position is to allow

a small strip of beading to be fitted in front of the

appliance feet.

Fix the base firmly to the floor using four appropriate

countersunk screws (see Fig. H).

With the appliance installed adjust all four feet ensuring

the machine is stable, and a clearance of approximately

5 mm is left between the top of the machine and the

underside of the worktop.

A final check for stability should be carried out with the

machine on spin with a load, this will identify the need

for any further fine adjustment to the feet.

A strip of beading approximately 605 mm W, x 5 mm

H, x 25 mm D must be screwed down into the base

directly in front of the machine's feet, this will provide

additional security.

If required an additional door magnet, part number

1242394-00/3 and disc, part number 1242393-00/5 are

available from spare parts.