ページを印刷するContinue until all weights have been added.
Memory recall
To view the totals in memory press MR key.
Memory clear
To clear the memory, just press M+ and MR together
Automatically accumulate
Press Print key during self checking, enter setting mode, press Tare key until display show P32COM,
press ZERO key to enter, press TARE key to select "mode", press ZERO key to sure, display will
show current RS-232 mode, press TARE key to select Auto. After you set, AUTO indicator on.
Press weight on platform, after stable, you will hear beep on twice, you can add or remote weight now,
scale will beep on again after stable, at last, remove all weight on platform, the last weight value will
store in memory
Chapter 6 Animal scale function
You can press ZERO TARE together to enter/escape animal weighing mode.
Let the animal on the platform, you can hear beep sound even the weight is drifting. The animal
function will lock the weight. In reading data lock mode, if you add/remove weight, display will still
update and lock new reading data.
Chapter 7 Key lock
After keyboard hasn't use for 10 minutes, keyboard will be lock, after enter lock status, if you press
any key, display will show "K-LCK".
If you want to escape lock mode and return work mode, hold PRINT, MR , ZERO key 2 seconds,
display will show "ULCK", return to normal mode.
Chapter 8 Battery
Charge the battery when the charge symbol is on. To charge the battery simply plugs the power cord.
The battery should be charged for 12 hours to full. Under the display there is an LED to indicate the
battery need charging.
If the LED is green the battery has a full charge.
If it is Red the battery is nearly discharged and yellow indicates the battery is being charged.
When the battery fails to hold a full charge. Please contact your distributor for replacement.
Low battery
Gross/Net
Unit
Chapter 9 Backlight
Backlight mode
Hold ZERO key 3 second, display will show "setbl ", press ZERO key to enter backlight setting,
press TARE key to change backlight mode
(BL ON: always on, BL AU: auto backlight, backlight will on when press any key or add load on scale,
BLOFF: backlight always off), press ZERO key to sure, press G/N key to escape.
set auto power off
- 3 -