- ページ 10

洗濯機 Electrolux EW 1230 FのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux EW 1230 F 24 ページ。 Washing machines
Electrolux EW 1230 F にも：取付説明書 (24 ページ), 取扱説明書 (25 ページ), 設置および取扱説明書 (25 ページ)

ページを印刷する

8 "Starttijd/Dép. diff." button (Delay

Start)

This button makes it possible to delay the starting of

the programme from 30 min – 60 min – 90 min, 2

hours and then by 1 hour up to a maximum of 23

hours. The delay you have selected is shown on the

display for about 3 seconds; afterwards, the duration

of the programme reappears.

The Delay start cannot be selected with "Drain" and

"Spin" programmes.

Selecting the delayed start

You must select this option after you have set the

programme and before you press the Start/Pause

button.

The machine starts its countdown. The programme

will start after the selected delay has expired.

Cancelling the delayed start

If you have already pressed the Start/Pause button,

and you wish to cancel the delay time, proceed as

follows:

• set the washing machine to Pause by pressing the

Start/Pause button;

• press the "Delay start" button until the display

0 0

shows the symbole «

'».

• press the "Start/Pause" button again.

Important!

The door will be locked throughout the delay time.

If you need to open the door, you must first set the

washing machine to Pause by pressing the

Start/Pause button. After you have closed the door,

press the Start/Pause button again.

9 Display

The following pieces of information are shown on the

display:

• Duration of washing programme in hours and

minutes, after you have selected a programme.

While the programme is running (after you have

pressed the Start/Pause button), the displayed time

value decreases by one unit every minute.

• The washing machine has completed the

programme: this is indicated by a flashing zero.

• The washing machine has stopped with water in

the tub, at the end of a programme with the

options: this is indicated by a flashing zero.

• Delay start, a time value indicated in hours and

selected by means of the relevant button.

The delay time is displayed for 3 seconds, then the

duration of the selected programme reappears.

After you have pressed the Start/Pause button, the

countdown begins, and the delay time value

decreases by one unit every hour up to 2 hours

and then by 30 minutes.

• An incorrect option selection has been made:

this is indicated by the message Err when a

function incompatible with the current programme

is selected.