- ページ 14

洗濯機 Electrolux EW 806 FのPDF 設置および取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux EW 806 F 18 ページ。 Front-loading washing machine
Electrolux EW 806 F にも：設置および取扱説明書 (20 ページ)

ページを印刷する

USING YOUR MACHINE

WASHING 2.25 KG OF SYNTHETICS AT 40°C

Suppose you have 2.25 kg of synthetic fabric laundry to

wash. They are rather delicate fabrics and should not be

washed at a high temperature.

1 Load the laundry

P0004

2 Measure out the detergent

3 Add the fabric softener if required

Open the door by pulling the

catch outward.

Load the items one at a time

and close the door.

Pull out the detergent

dispenser drawer from the

control panel. Measure out

the amount of detergent

required and pour into the

main wash compartment

Pour the fabric softener, if

required, into the

compartment marked

Do not exceed the MAX.

level and then close the

drawer gently.

4 Select the required wash programme

P0345

5 Start the machine

Before starting up the machine, check that:

¥ the appliance is plugged in

¥ the water supply taps are turned on

¥ the drain hose is correctly and securely positioned

¥ the door and the detergent dispenser drawer are closed.

Pull the programme selector dial outwards.

The operating pilot light will illuminate and the machine will

start operating.

6 At the end of the programme

After the last rinse, the machine will stop with water left in

the drum. This prevents the clothes from creasing if they

are left in the machine at the end of the wash cycle. Turn

the selector dial to DRAIN (N) or SPIN (G) to drain the

water. The door is controlled by a safety device which

releases 2 minutes after the end of the programme.

Before attempting to open the door you must ensure

there is no water in the drum.

Switch the machine off by depressing the programme

selector dial.

When the programme has finished, you are advised to

unplug the appliance and turn off the water taps.

WARNING: To prevent any water spillage, you must

select a draining programme, and ensure there is no

water in the drum, before opening the door.

Turn the programme selector

dial clockwise to the

required programme.