- ページ 7

コントローラー AirStage UTY-RNKYTのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。AirStage UTY-RNKYT 8 ページ。 Wired remote controller
AirStage UTY-RNKYT にも：取扱説明書 (13 ページ)

ページを印刷する

Refrigerant circuit address setting

(6) Press the "

" button and select the Remote controller

address (Select the relevant indoor unit).

(7) The Address code "02" blinks when pressing the "

" button.

< : Down button

> : Up button

(8) Set the Refrigerant circuit address data by pressing the

" button or "

(Range of setting is 00-99.)

(9) Fix the Refrigerant circuit address data by pressing the "

button. (Data is transferred to the indoor unit)

PROHIBITED

•

When Refrigerant circuit address

data is not set in the indoor unit.

(-- is displayed)

•

Set the Refrigerant circuit

address data again as per

procedure (8)-(9) above.

Completion of address setting mode

(10) Address setting mode is released and returns to normal display if the

" button, "

button are pressed simultaneously.

* Address setting mode is released automatically if no key is pressed for 60

seconds even the above buttons are not pressed.

(Switch to Address setting mode as per procedure (1) above.)

(11) After completing the ADDRESS SETTING, be sure to turn off the

power and turn it on again.

Remote controller address

Ex. When Remote controller ad-

dress "01" is selected.

" button or

Address code

" button.

Refrigerant circuit address data

Ex. When Refrigerant circuit ad-

dress data "18" is selected.

GOOD

When Refrigerant circuit address

data is set in the indoor unit prop-

erly.

(Blinking changes to steady illumi-

nation)

" button and "

Normal mode display

10. FUNCTION SETTING

This procedure changes the function settings used to control the indoor unit

according to the installation conditions. Incorrect settings can cause the

indoor unit to malfunction.

Perform the "FUNCTION SETTING" according to the installation conditions

using the remote controller.

•

Refer to the indoor unit installation manual for details on the function

numbers and setting numbers.

•

Prepare for setting of indoor unit referring to installation manual of indoor

unit before start of functional setting.

(1) Press the "

" button, "

" button simultaneously for more than 5 seconds to enter the

function setting mode.

(2) Press the "

" button to select the indoor unit number.

Unit number of

INDOOR UNIT

(3) Press the "

" button or "

number.

Function

Number

(4) Press the "

" button or "

select the setting number. The display ﬂ ashes during setting number

selection.

(5) Press the "

" button to conﬁ rm the setting.

Press the "

" button for a few seconds until the setting

number stops ﬂ ashing.

If the setting number display changes or if "- -" is displayed when the

ﬂ ashing stops, the setting number has not been set correctly.

(An invalid setting number may have been selected for the indoor unit.)

PROHIBITED

SU MO TU WE TH FR SA

•

When Setting Number data is

not set in the indoor unit.

(-- is displayed)

•

Set the Setting Number data

again as per procedure (4)-(5)

above.

" button and

SU MO TU WE TH FR SA

" button to select the function

SU MO TU WE TH FR SA

" button to

Setting Value

SU MO TU WE TH FR SA

GOOD

SU MO TU WE TH FR SA

When Setting Number data is set

in the indoor unit properly

(Blinking changes to steady illumi-

nation)

En-6