- ページ 4

サーモスタット Drayton 22083のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Drayton 22083 13 ページ。 Programmable room thermostat 5-2 day / 7 day
Drayton 22083 にも：クイック・スタート・マニュアル (2 ページ)

ページを印刷する

To enter Holiday mode press the < button until the pointer is

indicating HOL (fig 3). The temperature will flash and by pressing

the + or - buttons you can change to the temperature required (

in this example to 10.0 ºC) (Fig 3a).

Then press < again to set the time period.(in this example 14

days) using the + or - buttons. (it would be advisable in this

example to set the time period 1 day less (13 days) to ensure the

house temperature is back to normal on your return). (Fig 3b)

Once you have set your time period the time will flash for 10

seconds and then start the holiday period. To exit the Holiday

mode press either < or > to return to auto mode.

When changing time the display will scroll through Hr (Hours)

1-24 then d (Days) 1-99.

The display will show holiday time period and set temperature.

(Fig 3)

(Fig 3a)

(Fig 3b)

Battery Model only.

How do I know when to change the batteries.

When the batteries start to run low a battery icon will blink for

15 seconds every 15 seconds to indicate "low battery" during

this time the Digistat+3 will function normally (see fig 4).

Please replace batteries with (2 x AA 1.5V Alkaline batteries).

After 6 months the Digistat+3 will cease to function and will

permanently display the battery icon and nothing else, shown in

(fig 5).

(Fig 4)

(Fig 5)