- ページ 5

照明器具 Airstar Crystal Dynamic White WDMXのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Airstar Crystal Dynamic White WDMX 15 ページ。

2/ Connect the harness (D) between the service stage (C) and the LED stage (B).

•

Connect each end of the harness (male/female) to the socket circled in red on the diagram

On top of the service stage

Below the LED stage

3/ Remove the envelope (A) from its protective cover

4/ Place the envelope from top to bottom

Screw the wheel (H) on top of the envelope and unscrew it a quarter turn.

Unfold the envelope completely around the LED stage (B) and the service stage (C).

Close the zipper at the bottom of the envelope. The zipper must be vertical, under the service stage.

5/ Install the Crystal on a stand (see page 6)

6/ Connect the power cord (E) under the service stage (C)

NOTE

•

Plugging in the power cord restores previous animations or settings

•

Unplugging the power cord does not keep the envelope inflated

10/ Plug into a power source

Crystal Pixel White & Crystal Pixel Dynamic White – User's guide

Congratulations! Your Crystal Pixel is now ready to use.