- ページ 7
エアクリーナー Alen BreatheSmart 40のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Alen BreatheSmart 40 13 ページ。 Hepa air purifier
- 1. Table of Contents
- 2. Air Purifier Safety
- 3. Using Your Air Purifier
- 4. Operating Your Unit
- 5. Identification of Parts
- 6. Know Your Air Purifier
- 7. Care & Maintenance
- 8. Replacing the Filter
- 9. Why You Should Replace Your Filter
- 10. How to Replace the Filter
- 11. Troubleshooting Tips
- 12. Lifetime Limited Warranty
KNOW YOUR AIR PURIFIER
When using the air purifier for the first time in a room, we recommend that you use a higher fan
speed like speed three (3) or Turbo (T), for at least two hours in order to clean the room's air
initially. Then, we recommend that the air purifier run continuously on speed two (2) or three (3)
to maintain air quality or with the BreatheSmart 45i set your unit on Auto mode.
Features, BreatheSmart 40 and 45i
•
HEPA style filtration captures dust, allergens and airborne pollutants
•
Four fan speeds with a two, four, and twelve hour timer to control air circulation
•
Filter change indicator light keeps replacements on schedule
•
Simple and intuitive touch button controls
•
Auto-off safety feature when front cover is removed
CARE & MAINTENANCE
Turn The Lights Off/On
To turn the lights off on your unit, touch the
will not turn off. Touch any button to turn the lights back on, or touch the
second time to turn the unit off completely.
Replacing The Filter
The Filter Indicator has three lights: Green, Yellow and Red. The Green light will be illuminated
for most of the life of the filter. Yellow light will come on shortly before your filter should be re-
placed. This is the ideal time to order a new filter. You may order a new filter at www.alen.com/
filters or by calling 1-800-630-2396. The Red light will be illuminated when it is time to replace
the filter.
The filters used in Alen Air Purifiers are not designed to be washed, cleaned or otherwise
reused. Over time, the filters become overloaded with particles, decreasing their filtration per-
formance. We recommend regular filter replacements to extend the life of your air purifier and
maximize performance.
The black foam layer of the filter, known as the Pre-Filter, captures large dust and hair. This
layer is held on with Velcro
washed, to maintain efficient operation of the unit.
Reset the Filter Indicator
After replacing the filter, hold the FILTER button down for five seconds. The Red light will be
reset to Green.
Pure Air For Life
8
-like strips. This Pre-Filter can be vacuumed, or once removed
®
Power Button. The lights will go out but the unit
Power Button a