- ページ 11
ボイラー Drazice OKC 160 NTR / BPのPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。Drazice OKC 160 NTR / BP 18 ページ。 Stationary water heaters
Drazice OKC 160 NTR / BP にも： 操作および設置マニュアル (17 ページ), 操作および設置マニュアル (12 ページ), 操作および設置マニュアル (20 ページ), 操作および設置マニュアル (20 ページ), 操作および設置マニュアル (20 ページ), 操作および設置マニュアル (18 ページ), 操作および設置マニュアル (13 ページ)
ページを印刷する
2.4 ELECTRIC INSTALLATION
2.4.1 ELECTRIC INSTALLATION GENERAL INFORMATION
The electric wiring scheme is attached to the water heater on the side of the electric
installation guard (figure 4).
Connection, repairs, and wiring inspections may only be implemented by a company
(person) authorised to such activity.
Expert connection must be confirmed on the warranty certificate.
The appliance is connected to the 230 V/50 Hz electrical network using a fixed
moving conductor with a switch that turns off all network poles and the circuit
breaker (protector).
Installations in bathrooms, laundry rooms, rest rooms and showers, must be
in compliance with standards.
The degree of protection of electric parts of the heater is IP 45.
Adhere to the protection against electric shock injury according to standard.
2.5 CONNECTION OF APPLIANCE TO HOT WATER SYSTEM
a) Water heating by electric energy
After the appliance is connected to electric network, the heating element starts heating water. The element
is turned on and off by a thermostat. After reaching the temperature set, the thermostat switches off the
electric circuit and thus discontinues water heating. The control light signals if the element is in operation
Figure 4
- 11 -