- ページ 19

ボイラー Drazice OKC 200 NTRR / BPのPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。Drazice OKC 200 NTRR / BP 20 ページ。 Stationary water heaters
Drazice OKC 200 NTRR / BP にも：操作および設置マニュアル (17 ページ), 操作および設置マニュアル (12 ページ), 操作および設置マニュアル (19 ページ), 操作および設置マニュアル (20 ページ), 操作および設置マニュアル (20 ページ), 操作および設置マニュアル (18 ページ), 操作および設置マニュアル (18 ページ), 操作および設置マニュアル (13 ページ)

lower limit of temp. scope

(around 5°C)

fixed point on the control

panel

"anti-freezing" temperature

(about 8°C)

lower limit of temp. scope

(around 5°C)

"anti-freezing" temperature

(about 8°C)

Adjusting the thermostat knob to the left backstop does not mean permanent shutoff of the

heating element. When the heater is in use without blocking the daily rate, we do not

recommend the temperature to be set above 55°C. Select the "ECO" symbol as the

maximum.

4 IMPORTANT NOTICES

Without a confirmation of performed electrical installation issued by an authorised company, the

warranty certificate shall be void.

Check and exchange the Mg anode regularly.

You have to apply for approval of a local power supplier to connect the heater.

No stop valves can be put between the heater and the safety valve.

If the overpressure in the water main exceeds 0.48 MPa, a pressure control valve must be mounted

before the safety valve.

All hot water outputs must have a combination faucet.

Figure 8

upper temperature range

limit (about 74℃)

"ideal" temperature (about

60℃)

Fixed

mark

control panel

upper temperature range

limit (about 80℃)

"ideal" temperature

(about 55℃)

- 19 -

the