- ページ 12

エアコン Alen PORTABLE AIR CONDITIONERのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Alen PORTABLE AIR CONDITIONER 13 ページ。

ページを印刷する

IMPORTANT:

1) Turn off the appliance first before disconnecting from power supply.

2) Be sure to unplug the unit before cleaning or servicing.

3) Do not use gasoline, thinner or other chemicals to clean the unit.

4) Do not wash the unit directly under a tap or using a hose. The electrical cause danger.

5) If the power cord is damaged, it should be repaired by manufacture or its agency.

1 AIR FILTER

Clean the air filter at least once every two weeks to

prevent inferior fan operation because of dust.

Removal

Pull out the filter cover and remove the air filter from the

filter cover(see Fig.16).

Cleaning

Wash the air filter by immersing it gently in warm water

(about 40 C/104 F) with a neutral detergent. Rinse the

filter and dry it in a shady place.

Mounting

Attach the air filter to the filter cover using the attachment

hooks on the inner surface of the cover. Put the filter cover

back to the unit.

2 UNIT ENCLOSURE

Use a lint-free cloth soaked with neutral detergent to clean

the unit enclosure. Finished by a dry clean cloth.

3 POWER CORD AND PLUG

Press the locking lever above the power cord cover

downwards, the cover will be opened(see Fig.17).

Keep the power cord and plug tidy by rolled up and stored

behind the cover when not used for a long time.

NOTE: For some models, the power cord and plug can

not be stored behind the cover and directly exposed outside

because of equipping with different types of wire and plug.

4 UNIT IDLE FOR A LONG TIME

When you plan to leave this unit unused for a long time,

remove the water tank and you will find a section of hose

beside the continuous drain hose, which is plugged at the end.

Release the band and remove the plug from the end of

the hose, all the water in the bottom tray would drain

outside through the drain hose(See Fig.18).

Keep the appliance running with fan only for half a day in a

warm room to dry the appliance inside and prevent mold

forming.

Stop the appliance and pull out the power supply plug,

remove the batteries of the remote control.

Clean the air filter and reinstall it.

Disconnect the exhaust duct, keep it safety, and cover the

window(wall) hole with the adaptor cap.

MAINTENANCE

Fig.15

Filter cover

Fig.16

Cover

Fig.17

Remove the

drain plug

Fig.18