- ページ 21

オーブン Bosch MBA5350 0B SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bosch MBA5350 0B Series 44 ページ。
Bosch MBA5350 0B Series にも：ユーザーマニュアルと設置手順 (40 ページ)

ページを印刷する

.Cleaning function

T he self-cleaning surfaces in the cooking compartment

C l e a n i n g f u n c t i o n

are cleaned with the "EcoClean" cleaning function.

The self-cleaning surfaces (back panel, ceiling panel

and side panels) are coated with a porous, matt

ceramic material. This coating absorbs and breaks

down splashes from baking, roasting and grilling while

the oven is in operation. If the surfaces no longer clean

themselves adequately and dark patches appear, the

surfaces can be cleaned by the cleaning function.

Prior to initiating the cleaning function

Remove shelves, rails, accessories and ovenware from

the cooking compartment.

Cleaning the cooking compartment floor and the

inside of the appliance door

Remove the worst dirt from the cooking compartment

floor, the inside of the appliance door and the interior

lighting. Otherwise, patches will appear that can no

longer be removed.

Caution!

Do not use oven cleaner on the self-cleaning surfaces.

This will damage the surfaces. If oven cleaner does

come into contact with these surfaces, dab it off

immediately with water and a sponge cloth. Please to

not rub or use any abrasive cleaning materials.

Warning – Risk of burns!

; The appliance will become very hot on the outside

during the cleaning function. Never touch the appliance

door. Allow the appliance to cool down. Keep children

away from the appliance.

Setting the cleaning function

Make sure you follow all the preparation instructions

before setting the cleaning function.

Use the function selector to set EcoClean p.

Turn the temperature selector to cleaning setting p.

Switch off the appliance after 60 minutes.

You can also set the timer to remind you after

Note:

60 minutes.

Ventilate the kitchen while the cleaning function is

running.

Delaying the end time

You can delay the end time if required. Before starting,

touch the v button until the "End" symbol is highlighted

on the display. Use the @ button to delay the end time.

The appliance will switch to standby after it is started.

Changing and cancelling

The end time can be changed while the appliance is on

standby.

If you would like to cancel the cleaning function, switch

the appliance off by turning the function selector to the

"Off" position.

Once the cleaning function has ended

Once the cooking compartment has cooled down, wipe

down the cooking compartment with a damp cloth if

necessary.

During operation and while the cleaning function

Note:

is active, reddish patches may form on the surfaces.

This is not rust, but food residues. These patches are

not hazardous to your health and do not limit the

cleaning capacity of the self-cleaning surfaces.

Cleaning function