- ページ 12
室内装飾品 Ancar TD-700のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ancar TD-700 18 ページ。 Dental stools
ページを印刷するDENTAL STOOLS - QS4-692-01 / TD-700/600/500
ARM SUPPORT RING PLACEMENT
- Introduce the metallic ring of the accessories
bag through the piston axle A
position B
.
(Fig.11)
DO NOT TOUCH THE PISTON CAP
- Insert and fix the x3 M6 grub screw of the
accessories bag to the ring holes and fix these
firmly
.
(Fig.12)
FIRST ARM TRAM INSTALLATION
- Introduce the tube (support) hole B
through the piston axle A
the ring
.
(Fig.14)
DO NOT TOUCH THE PISTON CAP
SEAT PLACEMENT
- Introduce the TD-600 seat positioning hole B
through the piston axle A
(Fig.15)
- Sit down on the seat in order to ensure the
fixation.
SUPPORT ARM PLACEMENT
- Introduce the support arm axle A
the hole B
.
(Fig.16)
- Unscrew a little bit the knob C
ensure the axle A is well installed.
- Turn the Knob A
(Fig.17)
STOOL CHECKING
- Place the Td-600 on the working surface and
ensure a correct assembly by cheking a good
stool movement.
If the previous points have been done correctly,
the stool is ready to be used.
12
until the
(Fig.11)
(Fig.13)
until it stops on
(Fig.13)
(Fig.15).
through
(Fig.16)
and
(Fig.16)
until it locks the arm.
A
B
Fig.11
B
A
Fig.13
A
B
C
Fig.16
USER MANUAL
Fig.12
Fig.14
B
A
Fig.15
C
Fig.17
Fig.18