The cooking time has
elapsed
Changing the end time
Cancelling the end time
Calling up the time settings
20
After a few seconds, the oven adopts the settings and
switches to standby position. The time at which the
dish will be ready is shown in the display and the p
symbol is in brackets. The U and 0 symbols go out.
When the oven starts, you can see the cooking time
counting down in the display and the r symbol is in
brackets. The p symbol goes out.
A signal sounds. The oven stops heating. 00:00 is
shown in the display.
Press the 0 button. The @ or A button can be used
to set a new cooking time.
Or press the 0 button twice and turn the function
selector to the off position. The oven switches off.
Use the @ or A button to change the end time.
After a few seconds, the change will be adopted.
If the timer has been set, first press the 0 button
twice.
Do not change the end time if the cooking time has
already started to count down. The cooking result
would no longer be correct.
Use the A button to set the end time back to the
current time. After a few seconds, the change will
be adopted. The oven starts.
If the timer has been set, first press the 0 button
twice.
If several time functions have been set, the
corresponding symbols light up in the display.
The symbol for the time function that is visible
in the display is shown in brackets.
To call up the U timer, r cooking time, p end time
or 0 clock, press the 0 button until the brackets are
around the relevant symbol. The time requested is
shown for a few seconds in the display.
ページを印刷する