- ページ 4
湿らせる DrBrowns AN008のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。DrBrowns AN008 17 ページ。 Ultrasonic cool mist humidifier with night light
NIGHT LIGHT OPERATION
1. To turn the night light on, press the light button.
Continue pressing to adjust the brightness to your preferred level.
2. To turn the night light off, press the light button again until the
light turns off.
USING YOUR HUMIDIFIER
1. Connect the power cable to an available power outlet.
The indicator light will illuminate.
2. Turn the mist level control in a clockwise to the desired output to
activate the humidifier.
3. Aim the mist outlet in the desired direction.
4. To avoid moisture damage to your belongings, ensure that the
mist outlet is not directed towards walls, plugs, or furniture.
EMPTYING YOUR HUMIDIFIER
1. Turn off the humidifier, turn the switch to the Off
position and unplug the Humidifier. The indicator light
should not be illuminated.
2. Remove the water tank from the base.
3. Remove the tank sealing cap/valve by unscrewing
counter-clockwise.
4. Empty any remaining water from the tank and base,
then wipe any remaining water with a dry cloth or towel.
USING THE ESSENTIAL OILS FRAGRANCE FEATURE
1. Remove the mist nozzle from the humidifier.
2. Pull out the essential oil wick retainer from the mist outlet path.
3. Insert the wick into the retainer.
4. Place 2-4 drops of essential oil or aroma oil into the wick. (These oils are available commercially).
Note: Do not fill the wick in the humidifier as spilt oils can hinder the operation of the humidifier.
5. Insert the retainer into the humidifier mist outlet path.
6. Replace the mist nozzle onto the humidifier.
7. To start operation follow the normal operation instructions above. If essential oils or aroma
oils are not added, your humidifier will function as a regular humidifier.
TROUBLESHOOTING
If the humidifier is not operating check that:
1. The power cable is connected to the power outlet.
2. The mist level control switch is turned to an On position.
3. The water tank has been properly assembled onto the humidifier base.
4. There is sufficient water in the tank.
5. The water level pressure is properly seated.
3