- ページ 4

スピーカー Anchor AN-1000XのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Anchor AN-1000X 4 ページ。 Anchor mic-25: product brochure
Anchor AN-1000X にも：オーナーズマニュアル (4 ページ), 仕様 (1 ページ), オーナーズマニュアル (7 ページ), カタログ (2 ページ), オーナーズマニュアル (4 ページ)

ページを印刷する

BASIC SYSTEM OPERATION

The AN-1000X is the most versatile powered monitor on the mar-

ket, is designed to amplify the signal from a wide variety of input

sources. Use it on an A/V rack, as a studio monitor, in a trade show

booth or on a US Navy warship, you decide.

Here's How Easy It Is To Use

1. Place the AN-1000X in desired location

2. Plug the power cord into a grounded AC outlet

3. Plug an audio source into one of the three input

jacks on the back panel:

• LINE IN - RCA jack

• LINE IN - 1/4-inch phone jack

• BALANCED INPUT* - XLR jack

4. Turn volume control on front panel to minimum

5. Set power switch on back panel to ON

(red LED on front panel should light)

5. Adjust the volume, bass & treble controls to desired levels

IMPORTANT: To avoid feedback, do not position

a microphone in front of speaker.

*BALANCED INPUT JACK

The balanced XLR input jack allows the AN-1000X to be used in a va-

riety of applications. The input can be user configured for a Lo-Z mi-

crophone or bridging balanced line-level inputs (such as used in the

pro-audio and broadcast industry). In addition, the input has 15 volt

phantom power which may be switched on or off.

The factory default setting is for microphone-level inputs w/ 15 volts DC

phantom power. Follow the instructions below to change settings.

Change Balanced Input Jack Configuration

1. Remove rubber grommet located just above XLR input

2. Set the three dip switches w/ a small pointed object

3. Replace rubber grommet to protect system

DIP Switch Option Settings

SPEAKER OUT

The external speaker output jack (1/4"-phone,

unswitched) allows the user to power an auxiliary

unpowered speaker (such as the AN-1001X). Min-

POWER SWITCH

imum 8 ohms impedance for auxiliary speakers.

AN-1000X

CONTROL PANEL

AC POWER CORD RECEPTACLE

CAUTION: ALWAYS use shielded audio cables on input connections to prevent interference.

PROBLEMS? Consult the troubleshooting section on the back page of this manual.

NEED MORE HELP? Contact the Anchor Audio Customer Service Department - 888-444-6077.

LINE OUT

The line-level output provides a replica of the

composite input signal. Use it for direct recording

or to daisy-chain additional powered sound sys-

tems to the AN-1000X for greater crowd coverage.

BALANCED INPUT

The balanced XLR input jack can be user configured for a Lo-Z

microphone or bridging balanced line-level inputs. In addition

RUBBER GROMMET

it has 15 volt phantom power which can be switched on or off.

LINE IN

The line-level inputs

(RCA & 1/4" phone)

are used with input

sources such as VCR's,

CD players, musical

instruments, computers,

mixing consoles, etc.

Both inputs can be used

simultaneously w/ the

AN-1000X volume knob

controling composite

program output.