- ページ 9

録音機器 Dreadbox HypnosisのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dreadbox Hypnosis 11 ページ。 Time effects processor

TIME

sets the Delay time from about 40ms

up to 450ms

sets the level of the Delayed signal

MIX

FEEDBACK

sets the amount of repeats.

When at max, repeats are infinite.

is a method to loop your current

FREEZE

delayed signal, meaning that if no repeats are

audible or active, freeze will have no effect when

pressed.

Freeze will actually do 2 simultaneous functions:

A. Feedback level is set to max

B. Any new incoming signal will not be delayed.

This will be active only while the button is

pressed. Mix and Time controls, can still be used

while holding down the Freeze button.

Press and hold the DELAY button for 1 sec.

MODE

The 3 buttons will start to blink.

Choose your desired Delay Mode.

CLEAN

BBD

TAPE

If you do not want to hold down the Freeze

button, while the Freeze button is pressed, deac-

tivate the Delay effect, by pushing the Delay

button. This will keep the Freeze function to be

active without holding it down. To abort the

Freeze function, just press the Delay button

once.

When on Stereo setup, the Delay effect is

always on Ping-Pong mode, which is cool but it

gives the feeling that the allowed delay times

40ms-450ms are the half (20ms-225ms).

By setting a high amount of Feedback on the

Chorus-Flanger effect and having a High Input

Level, the delayed signal can be easily peaked.

So we suggest you to always check with your

highest desirable settings. If that occurs just

lower your Input Level.

After you set the Delay mode, you will

get back to the previous state.