- ページ 5

スピーカー Anchor AN-MiniのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Anchor AN-Mini 7 ページ。 Audio sound system
Anchor AN-Mini にも：仕様書 (1 ページ), オーナーズマニュアル (4 ページ), 仕様 (1 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), オーナーズマニュアル (10 ページ), オーナーズマニュアル (12 ページ)

AN-Mini/MiniVox Lite Owners Manual

BATTERY INSTALLATION

1. Remove the battery compartment cover located

underneath the control back panel of the AN-Mini

by pressing down the lock tabs of the battery

compartment cover

2. Slide out the battery pack from the AN-Mini

battery compartment

3. Insert ten 'AA' size batteries (alkaline or RC-30

rechargeable batteries) into the battery pack

Position the ten battery tubes into the battery pack

by following the polarity labels on the battery pack

4. Slide-in the battery pack into the battery

compartment Push the battery pack all the way in

5. Replace the battery compartment cover and push

cover to lock tabs in place

RECHARGEABLE BATTERY KIT (OPTIONAL ACCESSORY)

For applications where the AN-Mini PA system is used frequently, the RC-30 rechargeable battery kit

is available. This kit includes 10 rechargeable NiMH batteries and an AC charging adapter. When

fully charged the batteries provide approximately 12 hours of operation.

Using the RC-30 Recharge Kit

1. Install the 10 rechargeable NiMH batteries into the AN-Mini (see above - Battery Installation)

2. Insert the charger plug into the Input Jack labeled DC IN on the AN-Mini control panel

3. Plug the AC adapter into a power outlet for 4-6 hours to fully charge

Cycling the Bbatteries

For extended battery life, we recommend you fully charge the batteries once each month during

periods of infrequent use. Always fully recharge batteries before storing.

CAUTION: NEVER recharge other types of batteries. Doing so can result in battery

explosion. Use only rechargeable Nickel-Metal Hydride (NiMH) batteries.

NOTE: New batteries must be charged for 6 hours prior to first use.

NOTE: System Can Be Used During Charging!

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com

REPLACE BATTERY - HANDHELD TRANSMITTER

1. Unscrew battery cover on bottom of microphone

2. Replace old batteries with two fresh size 'AA'

alkaline batteries

3. Replace battery cover and tighten firmly

MADE IN USA

SIX YEAR WARRANTY

REPLACE BATTERY - BODY-PACK TRANSMITTER

1. Slide open battery cover on front of transmitter

2. Replace old batteries with two fresh size 'AA'

alkaline batteries

3. Replace battery cover by sliding firmly into place

RC-30 Rechargeable Battery Kit