- ページ 9

テント Anchor CenturyのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Anchor Century 11 ページ。 50' single or double center pole

TIE DOWN AFTER
5
LACING
After lacing and snapping sections, attach
guys and insert loosely into tension
winches.
Winch
Drum
Insert guy web into slot in winch drum and
rotate 1 1/2 to 2 times to secure web.
RAISE SIDE POLES
6
Start at downwind side. Insert each side
pole pin into side pole hole and raise slightly
less than perpendicular.
Bottom of each pole should be pointed
inward toward center of tent.
Wall ropes should run outside of corner
poles and side poles.
Tie jump rope around each side pole as it is
inserted in pole hole.
Continue around tent.
7
RAISE CENTER POLES
JUMP
Raise center poles nearest to wind
ROPE
direction to approximate position.
One installer to guide center pole pin
through hole to prevent snagging or
tearing of fabric as pole is being raised
to position.
Keep pole at a slant until other pole
at the same lace is raised. Tie jump
ropes as each center pole is placed in
approximate position. Adjust bases of
poles to exact location and align poles
vertically.
CAUTION: At this point, it is
required to properly anchor bases of
all center poles to prevent movement.
Web Guy
Web
Release
(Push
Downward)
WEBS
ATTACHED
LOOSELY
SEE WEB GUY LAYOUTS FOR
STAKING CONFIGURATIONS.
SIDE POLES INSTALLED
ON DOWNWIND SIDE
JUMP ROPE
LACE
9