- ページ 4

ステレオシステム Anchor bigfootのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Anchor bigfoot 13 ページ。 Line array sound system
Anchor bigfoot にも：クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ)

Bigfoot® Sound System Owners Manual

USING THE BUILT-IN AIR TRANSMITTER AND AIR WIRELESS COMPANION SPEAKER

1. Wireless Connection

Bigfoot Main Unit

1. Connect provided external antenna

2. Power on main unit

3. Power on AIR Companion Transmitter

4. Adjust volume knob on back panel

as needed

Bigfoot AIR Companion Unit

1. Connect provided external antennas

2. Power on companion unit

3. Power on AIR Companion Receiver(s)

4. Adjust volume knob on back panel as needed

NOTE: Verify both AIR Companion Transmitter

and AIR Companion Receiver(s) are synchronized

to the same channel. Default frequency setting

is 902.000. This can be changed as needed. See

Changing Frequency below.

Changing Frequencies on AIR Companion

Transmitter and AIR Companion Receiver(s)

- Using pointed edge tool, hold SET button for 2

seconds. Digital display will blink.

- Press UP or DOWN to select the desired frequency.

- Press SET, or wait 10 seconds for selection

to confirm.

Bigfoot Main Unit

Bigfoot AIR Companion Speaker

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com

2. Connecting Systems with Assistive Listening Beltpack Receiver(s)

Quick System Setup Instruction – Bigfoot main unit with

AIR Companion Transmitter and ALB-9000

1. Follow instructions to set up AIR Companion Transmitter

2. Install 2 AA 1.5V batteries in beltpack

3. Extend antennas for maximum reception

4. Plug in headphones

5. Power on ALB-9000

6. Adjust volume as needed

NOTE: Verify both AIR Companion Transmitter

and ALB-9000 are synchronized to the same

channel. Default frequency setting is 902.000.

This can be changed as needed. See Changing

Frequency in Step 1.

MADE IN USA

SIX YEAR WARRANTY