- ページ 7

ステレオシステム Anchor bigfootのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Anchor bigfoot 13 ページ。 Line array sound system
Anchor bigfoot にも： クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する
Anchor bigfoot オーナーズマニュアル
Bigfoot® Sound System Owners Manual
Anchor Audio UHF wireless is a 16 channel, diversity wireless system that receives signals with two independent antennae. With diversity
wireless, the receiver processes the stronger signal, effectively minimizing dropouts and interference from other transmitting sources. The
antennae are mounted internally so there are no obstructions or risk of damage. The 8000 series wireless operates between 540 - 570 MHz.
CHANNEL SELECTION - BUILT-IN RECEIVER
Select a channel, set the built-in receiver & microphone
transmitter to that channel before using your wireless system.
1. Choose any available wireless channel from 1 thru 16
(see page 6 for transmitter instructions)
2. Set the Wireless Channel Selection Knob to the channel
you choose in step 1
If you have additional wireless receivers, repeat above for the
additional receiver(s). Remember, each receiver/transmitter pair
must be set to different channels to avoid interference.
DIVERSITY WIRELESS BY ANCHOR AUDIO
NOTE: Ongoing wireless interference? The frequency you selected may be in use by other systems in the area!
Change channels until you find a clear frequency!
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
WIRELESS 1
WIRELESS 1
VOLUME CONTROL
WIRELESS 2
WIRELESS 2
VOLUME CONTROL
WIRELESS 3
WIRELESS 3
VOLUME CONTROL
WIRELESS 4
WIRELESS 4
VOLUME CONTROL
MADE IN USA
SIX YEAR WARRANTY
WIRELESS 1
CHANNEL
SELECTION
WIRELESS 1 RX
INDICATOR LIGHTS
WIRELESS 2
CHANNEL
SELECTION
WIRELESS 2 RX
INDICATOR LIGHTS
WIRELESS 3
CHANNEL
SELECTION
WIRELESS 3 RX
INDICATOR LIGHTS
WIRELESS 4
CHANNEL
SELECTION
WIRELESS 4 RX
INDICATOR LIGHTS
7