- ページ 7

デジタルカメラ Dream Chip ATOM oneのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Dream Chip ATOM one 18 ページ。 Dual sdi full hd pov camera
Dream Chip ATOM one にも：操作マニュアル (18 ページ)

ページを印刷する

Lens preparation

3 Lens preparation

The lenses must be equipped with special rubber gears.

3.1 Lens selection

Physical there are limitation to the minimum and maximum diameter with our

default gears.

3.1.1 Diameter limitation

If the lens is very small, the moveable gear of the motor drive cannot reach the

main gear. A custom gear can fix this limitation.

If the lens is to large it will block the motor. A custom plate can fix this

limitation.

Both working diameters can be found in the lens dimensions table.

3.1.2 Distance limitation

The motor position can be adjusted to reach the iris, focus or zoom position.

Depending of the used camera the minimum and maximum length is defined

in the lens dimensions table.

3.1.3 Lens Dimensions

The following dimensions are working with the default ATOM one - Motor

Drive kit.

Camera

Minimal Lens Diameter

Maximal Lens Diameter

Minimal Ring Distance

Maximal Ring Distance

3.1.4 Environmental Conditions

To prevent high lens torques (e.g. due to cold temperatures that harden the

grease inside the lens-mechanics) use only lenses according to their respective

temperature range (lens-spec).

ATOM one

28mm

39mm

4mm

49mm

ATOM one 4K mini

28mm

41mm

8mm

50mm