- ページ 9

スピーカーシステム Anchor Beacon BEA-8000CU2のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Anchor Beacon BEA-8000CU2 13 ページ。
Anchor Beacon BEA-8000CU2 にも：オーナーズマニュアル (11 ページ)

ページを印刷する

Beacon® Sound System Owners Manual

OPERATING THE BLUETOOTH TRANSMITTER

POWERING UP THE BLUETOOTH

1. Turn on the Bluetooth with the volume knob (it will make a boot up

noise).

2. Before hooking up your device, take a moment to go over what the

different LED light signals mean:

a. No light: indicates either Blutooth is off, or it is in sleep mode, and

cannot connect

b. Blinking light: indicates pairing mode, this is when you should

connect

c. Solid light: indicates connection, your device is connected

PAIRING A DEVICE

1. Press the pairing button (it will acknowledge pairing mode with a beep)

this mode will last 90 seconds. If no device is paired within the 90

seconds, the Bluetooth will enter sleep mode.

2. When the Bluetooth module is in pairing mode, it is discoverable and

will show up on the selection list of your Bluetooth enabled device.

3. Select the Bluetooth titled "Anchor Audio" to pair your device with the

Anchor Audio Sound System.

4. If a previously paired device is in range and discoverable, the unit

should automatically make a connection, however this may depend on

your individual device.

5. When the device has successfully connected to the Bluetooth, the

Bluetooth module will beep to signify connection and the Blue LED will

become solid.

6. Now you can play audio from your Bluetooth device to the Anchor Audio

Portable Sound System. You can adjust volume by using the Bluetooth

module's knob, as well as the volume control on your device.

NOTE: All Anchor Audio Sound System Bluetooth connections will be

named "Anchor Audio", so if your using multiple systems, be sure to

keep track of each connection.

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com

VOLUME/POWER KNOB

VOLUME

INDICATOR LIGHT

Frequently Asked Questions:

What is the range of Anchor Audio Bluetooth?

The Anchor Audio Bluetooth range is 100 ft. line of sight.

My Sound System is auto-connecting to a device, but I don't know which one. Can

I disconnect directly from the Sound System?

Yes, if your unit is auto-connecting to a device that you cannot identify (because for example,

you're in a room with other people who have connected to the unit in the past), you may

need to manually disconnect that pair from the Sound System itself. Just hold the 'pairing'

button for two seconds, and the Sound System will disconnect from the device it is currently

connected to, and immediately go into pairing mode.

What kind of modes can my phone be in that allow the Bluetooth connection to

still work?

Bluetooth will work in modes such as Airplane mode and Do Not Disturb (or the equivalent).

Just be sure to still have your Bluetooth setting turned on. To simplify the process, put your

phone in the desired mode first, and then secure the Bluetooth connection, as moving into

these modes may cause disconnection.

What happens if I get a phone call?

Incoming and outgoing calls should pause the audio stream. The audio from the call should

not be transmitted via Bluetooth. To avoid interrupting audio, set device in Airplane mode,

then enable Bluetooth, ensure your connected, and you should not encounter any interrup-

tions in your audio stream.

*Bluetooth connection and behavior may depend on your individual device settings and capabilities, all testing was

done using an Apple iPhone.

MADE IN USA

SIX YEAR WARRANTY

PAIRING

PAIRING BUTTON