- ページ 15

スピーカーシステム Anchor BIG2-XU2EUのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Anchor BIG2-XU2EU 17 ページ。

ページを印刷する

IMPORTANT SAFETY INSTRUCTIONS

General Warning or Caution

The Exclamation Symbol in the figure to the left appears in

Warning and Caution tables throughout this document. This

symbol designates an area where personal injury or damage

to the equipment is possible.

Electric Shock

The Electrical Shock Symbol in the figure to the left appears

throughout this manual. This symbol indicates a hazard

arising from dangerous voltage. Any mishandling could result

in irreparable damage to the equipment and personal injury

or death.

Protective Conductor Terminal

The Electrical Shock Symbol in the figure to the left appears

throughout this manual. This symbol indicates a hazard

arising from dangerous voltage. Any mishandling could result

in irreparable damage to the equipment and personal injury

or death.

European Union CE Mark European Union CE Mark

The presence of the CE Mark on Anchor Audio equipment

means that it has been designed, tested, and certified as

complying with all applicable European Union (CE) regula-

tions and recommendations.

Alternating Voltage Symbol

The alternating voltage symbol means that the unit can also

be used with AC (alternating current) that is in the form of

electric power from a wall socket.

Fuses

The fuse symbol in the figure to the left identifies the fuse

location on the Anchor Audio product. (Not required if not

user replaceable)

On Symbol

The On Symbol in the figure to the left represents a power

switch position on the Anchor Audio product. This symbol

represents a Power On condition.

Waste Electrical and Electronic Equipment (WEEE)

This symbol on the product or on its packaging indicates that

this product must not be disposed of with regular waste.

Instead, it is the user's responsibility to dispose of waste

equipment according to the local laws. The separate collec-

tion and recycling of the waste equipment at the time of

disposal will help to conserve natural resources and ensure

that it is recycled in a manner that protects human health

and the environment. For information about where the

user can drop off the waste equipment for recycling, please

contact your local authority for recycling advice.

Inspection for Damage

Anchor Audio products are carefully packaged at the factory

to minimize the possibility of damage during shipping.

Inspect the box for external signs of damage or mishandling.

Inspect the contents for damage. If there is visible damage

to the instrument upon receipt, inform the shipping company

and Anchor Audio immediately.

Electrical Requirements

Before attempting to power up the unit for the first time, the

following precautions must be followed:

Have a qualified electrician verify the wall socket that will be

used is properly polarized and properly grounded.

Warning: To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture, apparatus shall not

be exposed to dripping or splashing and no objects filled with

liquids, such as vases or cups, shall be placed on the apparatus.

The apparatus should be connected to a main socket outlet

with a protective earthing connection. For Nordic markings

refer to copy of marking label.

The plug in the power cord is the AC mains disconnected device

and must remain readily operable.

There should be a minimum distance around the apparatus for

sufficient ventilation. The ventilation should not be impeded by

covering the ventilation openings with items, such as newspa-

pers, table-cloths, curtains, etc.; no naked flame sources, such

as lighted candles, should be placed on the apparatus.

Equipment may be located above or below this apparatus, but

some equipment (like large amplifiers) may cause an unac-

ceptable amount of hum or may generate too much heat and

degrade the performance of this apparatus.

WARNING: Cancer and Reproductive Harm -

www.P65Warnings.ca.gov.

Inspection for Damage

Do not attempt to operate this equipment

if there is evidence of shipping damage or

you suspect the unit is damaged. Damaged

equipment may present additional hazards

to you. Contact Anchor Audio Technical

Support for advice before attempting to

plug in and operate damaged equipment.

Anchor Audio Technical Support:

800.262.4671 x782

WARNING

To avoid electric shock, connect the instru-

ment to properly earth-grounded, 3-prong

receptacles only. Failure to observe this

precaution can result in severe injury.