- ページ 9
スピーカーシステム Anchor GO GETTERのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Anchor GO GETTER 9 ページ。 Sound system
Anchor GO GETTER にも: クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ)
Go Getter Sound System Owners Manual
HAVING TROUBLE WITH YOUR SOUND SYSTEM?
CONDITION
No Sound (power LED off)
No Sound (power LED on)
Shortened Battery Life
Distorted Sound
Excessive Hum or Noise
HAVING TROUBLE WITH YOUR WIRELESS SYSTEM? (Wireless Models Only)
CONDITION
No Sound (RX Indicator: ON)
No Sound (RX Indicator: OFF)
POSSIBLE SOLUTION
• turn POWER switch ON
• charge battery or plug in AC cord
• safely shut down if unit overheats, turn volume lower &
turn speaker ON
• check for output from source
• make sure all cables are completely plugged in
• turn up volume control of input used
• remove plug from speaker output if not using external
speaker output
• charge battery fully; if battery life continues to deteriorate,
contact Anchor Audio customer service: 800.262.4671
• lower system volume control
• lower input volume control
• use shielded cables
• use balanced microphone
POSSIBLE SOLUTION
• turn up WIRELESS volume control
• make sure mic is plugged into body pack transmitter
• push mic power button
• turn Go Getter POWER switch on
• make sure transmitter power switch is on
• set receiver and transmitter to same channel
• replace battery in transmitter
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
GO GETTER TECHNICAL SPECIFICATIONS
Rated Power Output
75 watts AC / DC mode
Max SPL @ Rated Power 109 dB @ 1 meter
Frequency Response
60 Hz – 16 kHz
AC Power Reqs.
90 – 264 VAC, 50/60 Hz
Dimensions (HWD)
18" x 11" x 9"
(46 x 28 x 23 cm)
Weight (AC/DC)
23 lbs / 10.4 Kg
Inputs
Lo-Z (1 k Ω) , balanced, XLR
Microphone
(2 combo jacks)
12 VDC condenser mic phantom
pwr
Hi-Z (10 K Ω) , unbal, 1/4" phone
Hi-Z (10 k Ω) , unbal, 1/8" & 1/4"
Auxiliary
ANCHOR AUDIO CUSTOMER SERVICE
800.262.4671
FOR ADDITIONAL INFORMATION
visit www.anchoraudio.com
MADE IN USA
SIX YEAR WARRANTY
Sensitivity For Rated Output
Line
-8.4 dBV (380 mVrms)
Mic (unbal & bal)
-49 dBV (3.63 mVrms)
Outputs
Line (post fader)
Lo-Z, buffered, 1/4" balanced
Speaker
4-pole Neutrik Speakon® jack
(Specifications Subject to Change Without Notice)
9