- ページ 11
配管製品 Dream Line ALLURE SHDR-4257728-01のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Dream Line ALLURE SHDR-4257728-01 19 ページ。 Shower door
ページを印刷する10. Push the Glass profile (05) into the groove of
the Wall profile (06) and push the Magnetic
strip on jamb (24) into the groove of the Glass
profile (05).
Close the Glass door (04). Adjust the position of
the Glass door (04) and position of the Wall
profile (06) on the wall to ensure the Magnetic
strips are able to contact each other properly. In
this process, you have to use a level to ensure
that the Glass door is absolutely vertical.
Draw a line along the vertical edge of the Wall
profile (06) on the wall. Detach the Wall profile
(06) from the Glass profile (05). Place the Wall
profile (06) to the outlined position and mark
the drilling holes through the predrilled holes in
the Wall profile (06).
Now drill the holes using a Ø5/16" drill bit in
the wall and insert the Wall anchors (15) into
the holes.
Apply silicone along the Wall profile (06) and
around the holes. Fasten the Wall profile (06)
to the wall with the Round head Screws
ST4.2×40 (18). Then push the Glass profile
assembly into the Wall profile.
See Fig. 10 for details
11. After all final adjustments of the Assembled unit are
made, drill three holes from inside of the shower
through the first layer of the both the Wall profiles and
the
Glass
profiles
Secure the Wall profile and the Glass profile together
with the Round head screws ST4.2×10 (16) and
washers. Cover the screw heads with the Decorative
covers (20).
See Fig. 11 for details
"Allure" manual Ver.2 04/2016
using
an
Ø1/8"
1
3
5
7
9
1
drill
bit.
3
5
2
Inside
4
Inside
6
Ø5/16"
8
Fig. 10
2
Ø1/8"
4
Ø1/8"
6
Fig. 11
11