- ページ 11

スピーカーシステム Anchor MegaVox PRO MEGA-6000U2のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Anchor MegaVox PRO MEGA-6000U2 16 ページ。 Megavox pro public address system
Anchor MegaVox PRO MEGA-6000U2 にも：カタログ (2 ページ), オーナーズマニュアル (4 ページ), 仕様 (1 ページ), オーナーズマニュアル (4 ページ), オーナーズマニュアル (9 ページ), オーナーズマニュアル (8 ページ)

GENERAL OPERATION

Mic 1

(MEGA-6000 only)

An unbalanced, low impedance microphone input. For use with the

wired mic supplied with your unit, or any mic with a 1/4" phone

plug which does not require phantom power.

Mic 1/Wireless

(MEGA-6000U1 only)

The built-in receiver is connected to this input. Use the controller to

adjust the wireless mic volume. Inserting a plug into this input

disconnects the wireless input—to use a wired and wireless mic

simultaneously, plug the wired mic into the Mic 2 input.

Mic 2/Signal

An unbalanced, low impedance microphone input. For use with the

wired mic supplied with your unit, or any mic with a 1/4" phone

plug which does not require phantom power. The controller adjusts

both the signal alert and mic volume.

Line In

The line input (1/4"-phone jack) is used for playback of a tape

player, musical instrument or similar source. It may be used

simultaneously with the mic inputs for a composite output.

Line Out

The output signal is a composite of all the inputs. Use it to record

your presentation, or to "daisy chain" another powered sound system

to the MegaVox Pro for greater crowd coverage.

Speaker Out

Use the speaker output to drive Anchor's model MEGA-6001

companion speaker (in addition to MegaVox Pro's built-in speakers)

for greater output. When an external speaker is powered by the

MegaVox Pro, battery service per charge will decrease considerably.

Signal Alert Button

The Signal Alert provides an air horn type tone. The level is

controlled by the MIC/SIGNAL volume control. Caution, this can

produce VERY high or harmful sound pressure levels.