- ページ 6

浄水器 Anchor AF-4003のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Anchor AF-4003 10 ページ。 Under counter water filter system
Anchor AF-4003 にも：クイック・セットアップ・マニュアル (9 ページ), クイック・セットアップ・マニュアル (9 ページ)

FEED WATER SUPPLY

Check and comply with local plumbing codes as you plan, then install a cold feed water supply fitting.

A. PREFERRED INSTALLATION

1. Close the cold water supply valve under the sink.

2. Unscrew the flexible tubing from the supply valve that connects to the COLD water riser.

NOTE: If the cold water shut-off valve fails to turn off the water, the house water supply can be

turned off at the main water supply.

3. The water supply adapter can be installed at the faucet connection (A of Fig.#1) of the cold water

line or at the shut-off valve connection (B of Fig.#1) DO NOT OVERTIGHTEN

Disconnect the threaded nut at the connection and thread the water supply adapter, with the flat

washer in place, onto the connection and tighten. Connect the White tubing to the water supply

adapter with the treaded nut and tighten.

Thread the needle valve into the adapter tightly and turn the handle clockwise all the way in.

Open the main water supply valve and several house faucets to purge air from the system. Close

faucets when water runs smoothly.

DANGER:

Many homes are electrically grounded through the plumbing. To protect yourself from serious

injury or fatal shock, use a battery-powered hand drill only to make the hole.

DO NOT USE AN ELECTRIC DRILL.

Turn on cold water supply to the sink faucet and check for leaks

6 |

P a g e