ベビー＆幼児用家具 Dream On Me 685のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dream On Me 685 2 ページ。
ページを印刷する
Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
CUSTOMER SERVICE: +1 (732) 366-1788
STEP 2
STEP 1
Assemble latch (i & j) to the headboard (A & B)
Connect rail (C) and stabilizer bar (D)to the headboard ( A & B)
by using 5/8" screw (k).Then assemble plastic
by screws (a) and nuts (b),wood dowel (d), washer (g), washer (h).
block(n) horizontal to the headboard (A&B) by using
DO NOT fully tighten the bolts.
3/4"screw (m).Tighten screws using phillips head
screwdriver.Make sure that the latch on the bottom
of each headboard (A&B) are locked.
A
B
B
B
B
STEP 5
STEP 4
Assemble castors (e&f ) to the leg bottoms on the leg
Connect rail (C) to the headboard (A & B) by screws
on headboard (A&B).2 castors (e) with brake are in
(a), nuts (b), washer (g) and washer (h).
the front.THEN add the mattress(F).
THEN FULLY tighten all the bolts.
B
C
A
C
Follow bellow to fold the crib:
1.take out the mattress (F)
2.take out the mattress board (E)
3.unlock the latch on the headboard
4.fold the crib
①
2
1
②
/
STYLE NO
NUMÉRO DE MODÈLE:685
PORTABLE CRIB / CÈCHE PORTABLE
MFG DATE/ Date de Fabrication:May 2020
MFG CODE BLY
MADE IN CHINA / FAIT DANS LA CHINE
STEP 3
Slot in the metal pin into the notch of left and right
headboard side corner post.then move up and down
B
C
A
D
D
A
STEP6
Select the desire level,and use both hand to lift up the mattress
base,then adjust the level to your require height of the 2 level.
Slide in the bolt underneath the mattress board (E) to keep the
mattress support fixed.
B
A
PHILLIPS HEAD SCREWDRIVER
WRENCH
PHILLIPS HEAD SCREWDRIVER
AND WRENCH REQUIRED FOR
ASSEMBLY----NOT INCLUDED
CAUTION:ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 23-5/8"(600MM) BY 37-3/4"
(959MM) WITH A THICKNESS NOT EXCEEDING 2" (51MM) . THE CRIB CONFORMS TO
APPLICABLE REGULATIONS PROMULGATED BY THE CONSUMER PRODUCTS SAFETY
COMMISSION.
o highest level.
B
C
A:
Left head board (1PC)
B:
Right head board (1PC)
E
A
B
C
E
E:
Mattress board (1PC)
.
.
.
.
.
.
Caution:
.
.
.
.
.
.
.
.
.
.
Child can become entrapped and die when improvised netting or covers are placed on top of product.
Never add such items to confine child in product.
.
Please note that the warning sticker is placed on the cribs to keep parents and caregivers informed it is a
requirement by law under CPSC and ASTM. We do apologize for any inconvenience this may cause you.
.
Follow warnings on all products in a crib.
a:
2-1/8" Allen head bolt (10 pcs)
c:
2" Allen wrench (1 pc)
D:
Stabilizer bar (1PC)
C:
Rail (2Pcs)
i: Latch 1 (2 pcs)
F:
n: Plastic block (2 pcs)
Mattress (1PC)
WARNING
KEEP INSTRUCTIONS FOR FUTURE USE
Replace teething rail if damaged,cracked,or loose.
b:
Barrel nuts (10 pcs)
d:
1-1/2" Wood dowel (2 pcs)
e:
Castors (2 pcs)
f:
Castors (2 pcs)
k: 5/8" screw
m: 3/4"screw
j: Latch 2 (2 pcs)
(6 pcs)
(4 pcs)
WRENCH AND
PHILLIPS--HEAD SCREWDRIVER
REQUIRED FOR ASSEMBLY
----NOT INCLUDE