- ページ 2

温度コントローラー Athena 4000 SeriesのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Athena 4000 Series 16 ページ。 Temperature/process controller

Introduction

Congratulations on your purchase of an Athena® Series 4000. It is a U.L. listed, 1/4-DIN digital indicating

temperature controller for use in a variety of applications. The Series 4000 is more accurate than an

analog unit, and, most importantly, the digital indicator eliminates parallax errors and operator interpolation,

problems common to full scale analog controllers.

If you have questions or require any assistance with your controller or with any temperature control problem,

please contact your Athena representative.

Precautions

After unpacking, inspect the instrument for any physical damage that may have occurred in shipping. Save

all packing materials and report any damage to the carrier immediately.

Locating

Select a location for the controller where it will not be subject- ed to excessive shock, vibration, dirt, moisture

or oil. The ambient temperature of the area should be between 30° and 130° F. (Dust, oil, water resistant

cover is available to protect from harsh environments. Contact factory for details.)

Approvals

E66598 Temperature Indicating and

Regulating Equipment.

Safety Warning

In addition to presenting a potential fire hazard, high voltage and high temperature can damage equipment and

cause severe injury or death. When installing or using this instrument, follow all instructions carefully and use

approved safety controls. Electrical connections and wiring should be performed only by suitably trained personnel.

Do not locate this instrument where it is subject to excessive shock, vibration, dirt, moisture, oil, or other liquids. The

safe operating temperature range for this unit is 32°F to 140°F (0°C to 60°C).

This unit has been tested and found to be compliant with "NEMA Type 4X Enclosure - For Indoor Use Only." When

properly installed, this controller will maintain the integrity of a NEMA enclosure and remain "Watertight." This rating

is only applicable when the controller is properly installed into a suitably rated NEMA Type 4X housing.

E66598 Temperature Indicating and

Regulating Equipment.