- ページ 3

温度コントローラー Athena 6000のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Athena 6000 16 ページ。 Microprocessor-based temperature controller

ページを印刷する

Inputs:

Line Voltage

Sensor

Power consumption:

Ranges available:

Accuracy:

Temperature stability:

Cold end tracking:

Operating ambient for

rated accuracy:

Maximum lead

resistance for rated

accuracy:

Series mode noise

rejection:

Common mode noise

rejection:

T/C break protection:

Dual display:

Display update rate

and filtering

ºF/ºC:

Alarm 1 & 2:

Outputs:

- B Relay (time

proportioning)

-F Current

proportional

-S Pulsed voltage

-T Triac (time

proportional

-E1 & E2 Auxiliary

alarm relays

(on/off)

Filtered LED display:

T/C linearization:

Connections:

Dimensions:

Mounting:

Weight:

Recorder output:

(RTD only)

+10

120/240 Vac

50,60 Hz

-15%

T, J or K thermocouple or Platinum 100Ω at 0°C

Less than 6 VA (Instrument)

J couple 0-1400°F (0-760%)

K couple 0-2000°F (0-1093ºC)

±1 digit of full scale

5 µV/ºC Max 3 µV/ºC typ.

0.05ºC/°C ambient

0 to 55%

Thermocouple: 100Ω

RTD: 10Ω/lead

60 dB

120 dB

upscale standard

Process temp displayed continuously; setpoint or other

parameters updated on lower display

Greater than 5 times per second.

Analog and digital filtering techniques increase stability of

process & display.

Internal switch selection-process, setpoint and alarms

affected.

Adjustable over full range of control. LED displays alarm

status. 3 amp relay at 120 Vac normally open contact.

Reverse acting relay by switch selecting or low alarms.

Process/deviation mode selectable (internal switch).

Available heating only or heat/cool

SPST relay 7 amps resistive at 120 Vac, 5 amp resistive

at 240 Vac, 50 VA inductive

4-20 mAdc into 500 ohm max.

0-20 Vdc pulsed time proportioning signal for driving solid

state relays 500 ohms maximum input impedance

Solid state plug-in triac output. Rated 1 amp holding &

10 amps inrush

SPST relays, rated 3 amps at 120 Vac

4 digits for process, 4 digits for parameters.

Continuously calculated and updated using rom based

algorithm.

Inputs and outputs vla barrier strips with U.L. approved

Iocking sems terminals.

Front panel: 96mm x 96mm x 22mm

Case: 92mm x 92mm x 118mm

Depth behind panel: 96mm (approx. minus panel thickness)

Channel slides and screws

2 lb

1 mV/ºC for degree reading unit

0.1 mV/ºC for 1 10 degree reading unit

Specifications