- ページ 3

シュレッダー Formax COMBI 0030のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Formax COMBI 0030 8 ページ。 High-security paper shredder & optical media destruction device

Set-Up

1. Install unit on a level surface, away from heat sources and direct sunlight.

2. Insert the main power cord into a wall outlet with the appropriate voltage.

3. Open the optical media access door and ensure the vacuum power is plugged in. Attach the exhaust hose to one of

the two exhaust ports (left side or rear of cabinet).

4. Open the paper shredder access door and be sure the waste bin is in place, with a bag if necessary.

5. The main power switch on top of the unit has three positions: Optical Media On - Off - Paper Shredder On. Flip the

switch to the desired function.

NOTE: The paper shredder and optical media destruction unit can NOT be used simultaneously.

Optical Media Waste Vacuum

Vacuum power plug

Control Panel: Paper Shredder

1. READY / OFF / STOP button.

der into Ready mode. The LED will light. Off: Press and hold the button

for 3 seconds and the unit will turn off. Stop: If this button is pressed while

the shredding blades are moving, the blades will stop.

2. FORWARD / START button.

blades for a few seconds, to remove any material from the blades. LED

will light. Start: Press and hold for 2 seconds and the blades will run con-

tinuously until the Stop button is pushed. LED will light.

3. REVERSE button

LED will light.

Paper Waste Bin

Ready: Press briefly to put the shred-

Forward: Press briefly to run the cutting

: Press to run the cutters in reverse for a short time.

Vacuum

Exhaust Port

Vacuum

Exhaust Port