- ページ 6

シュレッダー Formax FD 8400HSのPDF メンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。Formax FD 8400HS 14 ページ。 High security shredder cross-cut
Formax FD 8400HS にも： 取扱説明書 (2 ページ)

ページを印刷する
Formax FD 8400HS メンテナンス・マニュアル
Sensor Sensitivity Recovery Function
Over time, the shredder photo eye may lose its sensitivity. Use the following steps to reset the sensor's
sensitivity.
1. If the sensor cannot detect paper:
• Press the Stop button for five seconds.
2. If the shredder is operating without paper in the feed opening:
• Press stop, then insert paper into the feed opening and press the Stop button for five seconds.
After following either of these steps, all LED lamps should be off, and the shredder will make a beep sound.
Sensitivity is recovered and the shredder is ready to operate.
Follow instructions under Operation.
Removing Motor & Cutting Head Unit
To remove the motor and cutting head unit for servicing:
•
Turn off circuit breaker and ON/OFF switches. Unplug
power cable from wall.
•
Open front door, remove screws connecting lid to
body case.
•
Unplug cables and remove lid; set aside.
•
Remove waste bin; set aside.
•
Using a 12mm socket, remove four nuts on under side
(see Figure 1).
•
Carefully lift out motor/cutting head unit from the top.
CAUTION: Heavy.
Figure 1
4