ページを印刷する
SA SU, MO TU WE TH FR SA, MO WE FR, TU TH SA, MO TU WE, TH FR SA, MO WE FR SU.
3. Press【SET】button, "HOUR" flashes, press【+】or【-】button to select hours value.
4. Press【SET】button, "MINUTE" flashes, press【+】or【-】button to select minutes value.
5. Press【SET】button to enter into "1on" setup. Press【ON/OFF】button to clear/reset.
6. Press【+】button to enter into "1off" setup. Ditto as "1on" setup.
7. Maximum setup: 20 program groups.
8. Press【CLOCK】button to return to CLOCK mode.
9. While setting, press【+】or【-】button for 3 seconds for accelerating accumulation function.
Note: Program group works only in AUTO mode and in the condition of no prior setup.
4. Count-down setup
Count-down functions are "d on" and "d off".
d on: Starts output after count-down ON. Closes output after count-down OFF.
d off: Closes output after count-down ON. Starts output after count-down OFF.
1. Under CLOCK mode, press【+】or【-】button to enter into setup of program group or count-down, switch to "d on"
or "d off".
2. Press【SET】button, "ON/OFF" flashes, press【+】or【-】button to switch between ON/OFF.
3. Press【SET】button, "HOUR" flashes, press【+】or【-】button to select from 0-99 hours.
4. Press【SET】button, "MINUTE" flashes, press【+】or【-】button to select from 0-59 minutes.
5. Press【SET】button, "SECOND" flashes, press【+】or【-】button to select from 0-59 seconds.
6. Press【SET】button to finish setup.
7. Press【C.D.】button to start count-down.
8. Press【C.D.】button during count-down, the count-down ends and returns to the initial setup value.
9. Count-down is effective under AUTO mode.
5. Random function
Under CLOCK mode, press【ON/OFF】button to enter into OFF mode. Press【ON/OFF】button again to display
AUTO mode.
Press【RND】button to display "R" and enter into RANDOM mode.
Random function is effective from 18:00 (PM6:00) to 6:00. Within this period, output ON is 15-30 minutes, and output
OFF is 45-60 minutes.
6. 12/24-hour switch
Under CLOCK mode, press 【CLOCK】button for 3 seconds, LCD display of "AM/PM" on top left corner indicates 12-
hour mode.
Press【CLOCK】button for 3 seconds, LCD display on top left corner disappears to indicate 24-hour mode .
7. Summer-time system function
Under CLOCK mode, press【ON/OFF】 and 【C.D.】buttons simultaneously. After it displays "S", the time will be
accelerated 1 hour.
Press again to switch to initial mode.
8. Technical parameters
Working power: 220-240V AC, 50Hz
Maximum resistance load: 1800W, 7.8A
IP20: For indoor use only
Smallest switching interval: 1 min
HASZNÁLATI ÚTMUTATÓ
Programozható heti digitális időkapcsoló
Üzembe helyezés:
1. Csatlakoztassuk a kapcsolóórát egy 230-240V névleges feszültségű dugaszoló aljzatba.
2. Töröljünk minden meglévő információt【RESET】gomb segítségével.
3. A kapcsolóóra most újra beállítható.
4. Hetente legfeljebb 98 be-/kikapcsolás programozható be