- ページ 11

折りたたみ機 Formax FD 380のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Formax FD 380 16 ページ。 Document folder
Formax FD 380 にも：取扱説明書 (11 ページ)

MULTI-SHEET FEEDING

The multi-sheet feeder is designed to fold pre-collated stapled or unstapled sets of up to three 20 # sheets of

paper.

1. Adjust the side guides on the feeder for the proper

paper size. Loosen the brass thumb screw. Open or

close the guides to ﬁ t the paper width and re-tighten

the thumbscrew (Fig 10a).

2. Slide the pre-collated paper set into the multi-sheet

feeder. When feeding stapled sets the documents

should be placed with the staple on the operator's

side and leading (Fig 11).

Fig 10b

Fig. 10a

Brass thumbscrew

Skew Adjuster

3. The sheets of paper will be automatically pulled into

the folder (there is a one second delay after the paper

is placed in the feeder).

4. If the fold is skewed, turn the skew adjustment knob

located on the back of the feeder left or right to make

corrections (Fig 10b).

5. To remove the multi-sheet feeder depress the

release levers located on either side of the lower back

side of the feeder (Fig. 12), tilt the feeder forward and

lift. To reinstall depress the levers and reinsert.

Fig. 11

Staple

Fig. 12

Release Levers