- ページ 2

アンテナ Ancom 1710-1880のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Ancom 1710-1880 2 ページ。 Outdoor wide-band directional antenna, x-pol, 698-960/1710-2170/2400-2700mhz, 6.5-9dbi

ページを印刷する

Model Number:

Outdoor Wide-band Directional Antenna, X-pol, 698-960/1710-2170/2400-2700MHz, 6.5-9dBi

Thanks for choosing our product! Before exciting installation, please read this guide carefully.

 Make sure qualified personnel are hired for installing this product such as working at height

with safety awareness, tools operating skills, and etc.

 Please check the items against the below packing list and make sure the product is in good

condition without any damage and none is missing.

 Check the necessary installation tools below are prepared on site before the installation.

 Find proper position and the mounting area to mount this antenna based on the coverage

design and planning documents.

STEP1: Mount one part of bracket on the back

of antenna as shown and fix the 4 screws firmly.

STEP3: Connect the both parts of brackets.

Adjust the antenna azimuth direction and fix the

4 screws firmly

STEP5: Joint the connectors with system and implement water-proof measure for connections.

Packing List

Antenna with 4*M4*8 Screws

Bracket Kits

St 6.5*40 Tapping Screw

10*50mm Plastic Plug

Hexagon/Philips Screwdriver

QC Check

*Information contained in this document is subject to confirmation at time of ordering.

Rev:2016-0-2i

Note for Installation and Preparation

Wall Mounting Instruction

STEP2: Mount another part of bracket on the wall

as shown.

STEP4: Adjust the antenna elevation angle and fix

the 4 screws firmly.

Percussion Drill andΦ10mm bit

4mm Hexagon Wrench (Supplied)

Philips Screwdriver (Supplied)

ODAG065X9-A4

List of Installation Tools

2/2