- ページ 6

フードセーバー Formax AutoSeal FD 1506 PlusのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Formax AutoSeal FD 1506 Plus 18 ページ。

UNPACKING AND SET UP, continued

5. To attach the conveyor to the out-feed, align the tab on the right side of the conveyor with the slot

on the machine (Figure 1a). Rest the support braces on the two alignment studs (see arrows), and

tighten the four thumbscrews provided (Figure 1b).

Tab and slot

Figure 1a

Figure 1b

3. Install outfeed wheels (Fig. 1c) by inserting the right side (spring loaded) into the right side of the

body, just above the conveyor (Fig 1d), then insert the left end of the outfeed wheel crossbar into the

left side.

4. Plug cord into machine and into wall outlet.

Spring-loaded end

Figure 1c

Figure 1d