- ページ 7

配管製品 Ancona Capri SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Ancona Capri Series 9 ページ。

UNDERMOUNT INSTALLATION

6. Loosely attach mounting brackets to the countertop, parallel to the cut-out opening using the supplied

mounting screws and nuts. Mounting screws with brass inserts are supplied with the sink, however,

countertop material vary and the correct type of fasteners should be recommended by your installer or

supplier.

7. Clean sink flange and underside of cut-out area of countertop,

making sure that the area is smooth and free of grease. Apply

continuous bead of silicone caulk evenly on top of sink flange.

(FIGURE 4)

8. Position and align sink over the countertop opening and press sink

onto countertop. Turn bent end of mounting bracket to snug over the

sink rim.

9. Check alignment of sink again and tighten fasteners to secure

sink. (FIGURE 5)

10. Wipe away excess silicone caulk with damp cloth, Connect drain and water supply according to

manufacturer's instruction.