- ページ 14
食器洗い機 Electrolux ESF2400OHのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Electrolux ESF2400OH 20 ページ。
ページを印刷する
14
www.electrolux.com
8.3 Cleaning the spray arm
Do not remove the spray arm. If the
openings in the spray arm are clogged,
remove remaining parts of soil with a thin
pointed object.
8.4 External cleaning
• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products,
abrasive cleaning pads or solvents.
8.5 Internal cleaning
• Carefully clean the appliance,
including the rubber gasket of the
door, with a soft damp cloth.
9. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
9.1 What to do if...
With some problems programme indicators flash intermittently indicating a
malfunction.
Problem
You cannot activate the appli‐
ance.
The programme does not
start.
The appliance does not drain
the water.
The appliance does not fill
with water and an intermittent
acoustic signal sounds for ap‐
proximately 30 seconds.
The display shows E1.
• To maintain the performance of your
appliance, use a cleaning product
designed specifically for dishwashers
at least once a month. Carefully follow
the instructions on the packaging of
the product.
• Do not use abrasive products,
abrasive cleaning pads, sharp tools,
strong chemicals, scourer or solvents.
• Using short-duration programmes
regularly can cause grease and
limescale buildup inside the
appliance. Run long-duration
programmes at least twice a month to
prevent the buildup.
Possible solution
• Make sure that the mains plug is connected to
the mains socket.
• Make sure that there is no damaged fuse in the
fuse box.
• Make sure that the appliance door is closed.
• Press the start button.
• If the delay start is set, cancel the setting or wait
for the end of the countdown.
• Make sure that the drain hose is correctly con‐
nected.
• Make sure that the filters in the appliance are
clean.
• Make sure that the kitchen sink drains correctly.
• Make sure that the water tap is open.
• Make sure that the pressure of the water supply
is not too low. For this information, contact your
local water authority.
• Make sure that the water tap is not clogged.