- ページ 3

ヒーター Formech 450のPDF 設置、操作、サービスマニュアルをオンラインで閲覧またはダウンロードできます。Formech 450 14 ページ。 Single heater vacuum forming machine

Safety

Please read and follow the below safety instructions

before attempting to install or operate your machine.

Do not operate the machine until you have been trained and are fully conversant with it.

Read and understand all of this user's manual.

Check your supply voltage and frequency. Make sure it is compatible with your machine.

Your machines electrical specification is on the plate on the right hand side.

You must ensure that the machine is properly earthed and fused.

The earth wire is GREEN with a YELLOW stripe.

The live wire is BROWN

The neutral wire is BLUE

Call in a suitably qualified technician if you are in any doubt.

Turn off the machine and disconnect the power supply when the machine is not in use.

The heater and pump on this model are not intended to be left running indefinitely.

Never remove any panels unless the electrical supply has been isolated.

Never remove any warning labels from the machine.

Only use the machine for vacuum forming plastic. It is not intended for any other purpose.

Ensure that the area you are working in is properly ventilated and that you are aware of

the potential hazards from the plastics you are forming.

Always let the machine cool down before attempting to work on it. Some parts of the

heater and heat shield become extremely hot during operation.

Ensure that the area surrounding the machine is clean and frequently cleared of finished

product and any scrap.

This machine is fitted with a dry running vacuum pump. Do not lubricate. Do not allow any

liquid to enter the vacuum system. Ensure that moulds are properly sealed to prevent

ingress of dust into the vacuum circuit. Severe damage may be caused if the above is

not observed.

Daily repetitive use of this or any other machine may lead to a) fatigue and loss of

concentration b) possible strains. Operators should be trained in the use of correct lifting

techniques in order to minimise these effects.

Users of this machine should complete regular competence tests.

Thank you for choosing Formech.

Formech 450