- ページ 11

血圧モニター AND UA-767PCのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AND UA-767PC 17 ページ。 Digital blood pressure monitor

This device stores up to 126 sets of measurement data in memory automatically.

If an error message appears, the measurement data will not be stored.

Whether the data will be stored or not after the measurement can be selected as

follows:

•

When the START button is pressed or the automatic power OFF function

works after a measurement, the measurement data will be stored in

memory.

•

When the clock button is pressed after a measurement, the measurement

data will not be stored in memory.

Recalling Memory Data

To access measurements stored in memory, wait until the monitor is in standby

mode. Then, press and hold the START button until the display shows the most

recent measurement.

The display will show all of the stored measurements starting with the most recent

and then will return to standby mode.

To interrupt memory display, press the START button to initiate inflation mode. To

put the monitor in standby mode, press the START button again.

To erase measurements stored in memory, wait until the monitor is in standby

mode. Then, press and hold the clock button until the buzzer sounds and the

memory access indicator blinks. All data in memory will be erased.