- ページ 4

フィットネス機器 Athletica Sport Systems GlassFlexのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Athletica Sport Systems GlassFlex 7 ページ。

GlassFlex® adjustment

Product Manual

Step 3: Adjusting U-Bolts and GlassFlex® Buffers to level shielding

n If shielding is leaning towards the ice surface more than 1/4" over 3 feet, loosen top nuts.

Loosen the top nuts (fig. 1) inside the aluminum tube which line up to the shielding you want to lean back from ice side.

IMPORTANT!

DO NOT COMPLETELY REMOVE THESE NUTS.

As you loosen these top nuts, take a suction cup attached to the shielding and shake the shielding. This will help to

ensure the shielding is level when you have completed adjustments.

Use a level to ensure you are 'level to 1/4" over 3 feet' leaning towards ice surface.

n If shielding is leaning towards spectators, tighten top nuts.

First, lower the center nuts (fig. 3) directly under the tube on the U-Bolt so they do not interfere when tightening

the top nuts.

fig. 1

fig. 3

554 Parkside Drive, Waterloo, Ontario, Canada N2L 5Z4 TEL 519-747-1856

720 Innovation Drive, Shakopee, Minnesota, USA 55379 TEL 763-249-7465

fig. 2

fig. 4