- ページ 2
ラック＆スタンド Forms + Surfaces SUMMIT BIKE RACKのPDF インストレーション・インストラクションをオンラインで閲覧またはダウンロードできます。Forms + Surfaces SUMMIT BIKE RACK 3 ページ。
ページを印刷するSUMMIT
TM
STEP BY STEP
FOR ALL SURFACE MOUNTED SUMMIT BIKE RACKS
Position bike rack
• Position bike rack so that mounting
holes line up with anchors.
T 800.451.0410 | www.forms-surfaces.com
© 2014 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.
BIKE RACK
Attach bike rack
• Insert four 3/8"-16 x 1-1/4" hex head
cap screws (b) into mounting holes in
bike rack.
SURFACE MOUNT INSTALLATION INSTRUCTIONS
b
Attach base plate & tighten screws
• Slide base plate over bike rack.
• Thread two 3/8"-16 x 1" pin-in-hex
button flat head screws (c) through each
hole using 7/32" hex bit for tamper-
resistant screws.
• Tighten all screws.
NOTE: Forms+Surfaces recommends
applying Loctite
locking adhesive.
c
®
or similar thread-
page 2 of 3 | Rev. 05-19-14