- ページ 6
レーダー Carmanah SpeedCheck-18のPDF インストールマニュアルをオンラインで閲覧またはダウンロードできます。Carmanah SpeedCheck-18 12 ページ。 Led display
Carmanah SpeedCheck-18 にも: キャビネット・ドア交換マニュアル (10 ページ), 交換マニュアル (14 ページ), インストールマニュアル (18 ページ), マニュアル (16 ページ), 交換マニュアル (11 ページ)

3.0 Installation
The following tools and materials may be required to mount the External Radar Kit:
a. Drill and drill bits
b. Socket set
The following is a summary of the installation sequence of the External Radar Kit:
1. Determine installation location on pole for radar module, radar speed sign and cabinet
2. Install radar speed sign and cabinet per supplied instructions
3. Drill holes for radar cable and mount through bolts, if required
4. Fish radar cables, install radar and mount to pole
5. Aim radar module
6. Connect radar harness and power on system
3.1
Determine Installation Location on Pole
The radar module should be mounted on the pole so that its front face directly faces and has an unobstructed
view of oncoming traffic. The cable on the radar module protrudes approximately 8 ft (2.4 m) beyond where it
enters the pole. The SpeedCheck sign radar cable protrudes approximately 7 ft (2.1 m) from its junction box. It is
recommended that the radar cables be routed into the cabinet and mated.
For optimal radar performance:
For maximum range, mount radar at least 6 ft (1.9 m) above the ground
•
•
Minimize the angle between target traffic and the radar module
If the radar module can't be located near the side of the road, it may need to be pointed further up
the road to detect vehicles effectively.
3.2
Install SpeedCheck Sign and Cabinet
Use the instructions supplied with your system to install the SpeedCheck sign and power cabinet. Wrap the
circular connector on the sign's radar input cable with tape to protect it from debris and fish it from the sign to the
cabinet, along with the sign's 2-conductor power cable.
The connectors on the radar cables are sealed and UV-resistant. For SPEEDCHECK-15 signs
without the separate power cabinet, the radar cable connection can be left in the pole, in conduit,
or outside the pole as required.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
SPEEDCHECK-15/18 EXTERNAL RADAR KIT
c. Screwdriver
d. Fish tape
3.0 INSTALLATION
6
|
carmanah.com