- ページ 6

照明器具 Carmanah F SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Carmanah F Series 18 ページ。 Rrfb mast arm kit
Carmanah F Series にも：クイック・スタート・マニュアル (20 ページ), インストールマニュアル (20 ページ), インストールマニュアル (16 ページ), エネルギー管理システム交換マニュアル (12 ページ), インストールマニュアル (20 ページ), 交換マニュアル (9 ページ), インストールマニュアル (18 ページ)

4.0 Installation

The following tools and materials may be required to mount the Radar Detection Kit:

a. Drill and drill bits

b. Socket set

The following is a summary of the installation sequence of the Radar Detection Kit:

1. Determine installation location on pole for Radar Detection Kit

2. Install Carmanah E, F or G system on pole per supplied instructions

3. Drill holes for radar cable and bolts, if required

4. Fish radar cable, install radar & mount to pole

5. Aim radar module

6. Connect and configure radar module if required

7. Test system

4.1

The radar module should be mounted on the pole so that its front face directly faces and has an unobstructed

view of oncoming traffic. The radar module cable is 9.8 ft (3.0 m) long. To allow sufficient cable slack, the vertical

distance between the radar mount and the E/F/G system should be at most 7 ft (2.1 m).

For optimal radar performance:

For maximum range, mount radar at least 6 ft (1.9 m) above the ground

•

Minimize the angle between target traffic and the radar module

•

If the radar module can't be located near the side of the road, it may need to be pointed further up

the road to detect vehicles effectively.

4.2

Use the instructions supplied with your system to install the Carmanah E, F or G system onto the pole.

When multiple wireless Carmanah E, F or G systems are triggered by one or more systems

equipped with the Radar Trigger Kit, ensure the systems are set to the same radio channel. See

the Carmanah E/F/G Series User Manual at

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

RADAR DETECTION KIT

c. Screwdriver

d. Fish tape

support.carmanah.com

for details.

carmanah.com