- ページ 15

セキュリティシステム Carmanah R247-EのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Carmanah R247-E 20 ページ。 24 hour flashing beacon
Carmanah R247-E にも：ユーザーマニュアル (20 ページ), エネルギー管理システム交換マニュアル (12 ページ), インストールマニュアル (20 ページ)

5.1

Push Button Installation (R920-E/F & R820-E/F Beacons)

If the E or F Series is wired for a push button but none is needed (such as

an advance RRFB), insulate the ends and secure the wires.

The push button can be connected in either polarity.

1. For round poles, cut holes to size and tap as required. Deburr the hole that the push button wiring will

pass through.

2. Feed the push button cable through the pole, creating a drip loop.

6.1

Battery Installation

Once the solar engine is secured and the beacons and other devices are in place, the batteries can be installed.

1. Open the solar engine and install the batteries, connecting each battery using the correct polarity. Secure

batteries with battery strap; note proper routing.

2. Batteries must be installed with the terminals facing outward (E Series, left image below) or upwards (F

Series, right image below).

3. The system will power up once the batteries are connected. If it is part of a radio-connected group, all

members of the group will now be able to communicate with each other.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

E/F SERIES QUICK START GUIDE

carmanah.com