ツール ANDAL SYSTEM TILE&SHAKEのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ANDAL SYSTEM TILE&SHAKE 2 ページ。 Vibrating suction cup
USER'S MANUAL
TILE&SHAKE is a vibrating suction cup for tiles, slabs, porcelain, marbles and glass. It is used for both
outdoor and indoor tile installation, and has replaced the traditional rubber mallets, avoiding any "void"
which may cause dangerous damages.
TILE&SHAKE has a double grip to be more comfortable; it's very easy to use, efficient and safer, thanks
to the exclusive "locking lever" of the suction cup.
The TILE&SHAKE KIT includes: 1 suitcase, 1 vibrating suction cup, 2 lithium batteries, 1 charger
SPECIFICATIONS
Power:
DC12V
Frequency:
13000r/min
Max load allowed:
100kgs
Size:
38*12*11 cm
Suction cup size:
13,5 cm
Battery:
lithium
HOW TO USE
1. Put TILE&SHAKE on the tile to be laid, hold the locking lever handle (1) to activate the suction
cup; hold the grip (2) for a better performance;
2. Lift the tile, install it on the floor and turn the vibration on with its power button (3);
3. Choose among the 6 levels of the vibration (4);
4. If you want to release the tile, just hold the locking lever handle (1) and switch the level
release (5).
WARRANTY TERMS AND CONDITIONS
·
2-year warranty (invoice or receipt needed)
·
Store the product in its own suitcase and in dry place
·
Clean it after using
·
Faults resulting of an improper use of the product will be not covered by the warranty
CHARGING INSTRUCTIONS
1. Before using TILE&SHAKE for the first time, please charge the battery; when the light is red,
the battery is charging, when it's green, the battery is full;
2. Use its original charger;
3. Battery charge time 3-4 hours;
4. The working time of a battery 6-8 hours;
5. If battery is not used for long time, please charge it every three months to maximize the
battery life.
6. Keep out of reach of children.
7. Non esporre le batterie al contatto con sostanze liquide.
8. Do not break open or physically abuse the battery.
9. Follow the disposal advice of your local waste regulations for batteries.
IMPORTANT NOTES
·
In case of tiles larger than 90*90 cm (or any product heavier than the maximum load allowed),
it is recommended to work with 2 or more suction cups and 2 or more workers;
·
In order to perfectly spread the mortar, it is recommended to make circular movements from
the internal to the external part of the whole tile. Unlocking the suction cup is required, by
holding the locking lever handle (3) and switch the level release;
·
It is recommended to spread the mortar 1 cm less per side, in order to avoid that it comes out.
·
TILE&SHAKE can be used along with other tiling tools.
ANDAL
SYSTEM
srl
TILE&SHAKE
Ventosa Vibrante
per piastrelle e lastre
DISTRIBUITO DA ANDALSYSTEM S.R.L.
www.andalsystem.it
Kit
Valigetta
1 Valigetta
1 Ventosa Vibrante
2 Batterie Litio
1 Caricabatteria