- ページ 7

セキュリティシステム Carmanah R247-GのPDF 取扱説明書補足をオンラインで閲覧またはダウンロードできます。Carmanah R247-G 12 ページ。 Wireless control
Carmanah R247-G にも：クイック・スタート・マニュアル (16 ページ), マニュアル (11 ページ), エネルギー管理システム交換マニュアル (12 ページ), キャビネット・ドア交換マニュアル (10 ページ), マニュアル (9 ページ), マニュアル (10 ページ), インストールマニュアル (14 ページ), マニュアル (10 ページ), マニュアル (10 ページ)

4.3 Beacon Intensity Settings

This product has been sized and configured for sustainable 24-hour operation at ITE intensity for RED LED traffic

beacons – 365 candelas (Current setting of 220mA on the OBUI).

Note:

If higher intensities are required either for 24-hour or temporary system activations, please consult Carmanah prior

to making intensity adjustments.

Increasing beacon output intensity may result in either unsustainable operation or a

reduction in usable battery life.

5.0

Please consult the handheld controller user manual for complete instructions regarding the use of the Carmanah

handheld controller:

When configured for wireless operation, and when operated with the handheld controller, the system can be

operated in one of two ways:



Autonomous Mode: The system once activated will remain active with the beacons flashing indefinitely

until the system receives a "Lights Off" command from the handheld controller.



Temporary Mode: The system once activated will remain active with the beacons flashing for 15 minutes,

after which, the system will automatically turn the beacons off, unless, the system recieves a "Lights Off"

command from the handheld controller in the interim.

Note:

In wireless mode, the system when activated by the handheld controller, will flash the beacons at the intensity that

was preset through the system OBUI:



The handheld controller sends on/off commnands only.



Beacon intensity cannot be adjusted using the handheld controller

See table following page: